|
HAZDUST Wet Dust Collectors are
designed to provide efficient, 99% at 5 microns,
cost effective control of all flammable and
non-flammable metal dust contaminants generated
from a variety of manufacturing and process
applications. Typically used for control of
moderate to heavy concentrations
of contaminants, the HAZDUST series tables can be
used for grinding, polishing, and dry buffing. The auto
water fill with low level shutoff system can minimize
the maintenance. Washable high efficiency mist
eliminator provides reduced filter replacement costs.
The HAZDUST will help with compliance to
local OSHA and NFPA regulations by drawing
contaminants away from the operator’s breathing zone
and reducing the flammability concerns
with metals such as aluminum and titanium.
The HAZDUST unit comes standard with
“Dust Blocker Technology”, stainless steel construction
on wetted surfaces, direct drive blower and TEFC
motor, polypropylene mist eliminator, auto water
level control with low level shutoff, and a
factory pre-wired control panel. Four standard
airflows are available: 1800, 3000, 4000 and 4500
CFM. |
|
Model |
CFM |
Inlet |
HP |
WxDxHeight (In.) |
|
HAZDUST 1800
|
1800 |
8” |
5.0 |
36 x 50 x 86 |
|
HAZDUST 3000
|
3000 |
10” |
7.5 |
48 x 52 x 86 |
|
HAZDUST 4000
|
4000 |
12” |
10.0 |
72 x 54 x 86 |
|
HAZDUST 4500
|
4500 |
14” |
10.0 |
72 x 56 x 86 |
Note: Base adds 8” width on each side
and 5” depth on the back
 |
