|
HAZDUST Wet Downdraft Tables are designed to
provide efficient, 99% at 5 microns, cost effective control of all flammable
and non-flammable metal dust contaminants generated from a variety of
manufacturing and process applications. Typically used for control of
moderate to heavy concentrations of contaminants, the HAZDUST series tables
can be used for grinding, polishing, and dry buffing. The auto water fill
with low level shutoff system can minimize the maintenance. Washable high
efficiency mist eliminator provides reduced filter
replacement costs. The HAZDUST will help with compliance to local OSHA and
NFPA regulations by drawing contaminants away from
the operator’s breathing zone and reducing the flammability concerns with
metals such as aluminum and titanium.
The HAZDUST unit comes standard with “Dust
Blocker Technology”, stainless steel construction on wetted surfaces,
direct drive blower and TEFC motor, polypropylene mist eliminator, auto
water level control with low level shutoff, and a factory pre-wired control
panel. Three standard table top sizes are available 36” x 36”, 36” x
48”, and 36” x 72”. Table top air velocities are a minimum of 325 or more
feet per minute. Typical table top loads for the bench are 75 lbs per square
foot. |
|
Model |
CFM |
Table
Size |
HP |
WxDxHeight (In.) |
|
HAZDUST 3636 |
2000 |
36” x 36” |
3.0 |
36 x 64 x 86 |
|
HAZDUST 3648 |
3000 |
36” x 48” |
5.0 |
48 x 64 x 86 |
|
HAZDUST 3672 |
4800 |
36” x 72” |
7.5 |
72 x 64 x 86 |
Base adds 18.5” to width and 4”
to depth
FEATURES
-
Airflows range from 2000 to 4800 CFM depending
on table top size and motor horsepower.
-
Direct drive non-sparking aluminum backward
curved blower
-
Washable polypropylene mist eliminator
Aluminum grating table top work
surface.
-
Automatic water level control with low
level shutoff.
-
High level shutdown control
-
Automatic shutdown with loss of airflow.
-
Factory pre-wired control panel
-
34 inch table top height
-
Hinged Side Panels
-
Table designed for handicap accessible
OPTIONS
|
